LOCATING SOLUTION

 

Water & Acid Leak Detection Locating Solution

WITH FG-NET UNIT

This water leak or acid leak detection solution contains FG-NET leak monitoring unit, FG-EC water sense cable / FG-AC acid sense cables and leak detection system accessories.

FG-NET system is a truly versatile system – a single control panel is capable of monitoring both water and oil leak detection circuits.  Hence TTK offers a complete leak detection solution in building application.

 LOCATING SOLUTION WITH FG-NET

Digital unit for leak detection FG-NET : The FG-NET digital unit is designed to be used for water leak detection, bases leak detection acid leak detection and fuel leak detection. It is ideal for mission critical areas such as data centers, trading floors, semi-conductor plants. FG-NET unit can display a precise location (to the nearest meter) on a dynamic map. It detects simultaneous leaks hence avoid “a leak hide another” risk. Furthermore, the FG-NET digital unit can transmit the leak information to other LAN-connected equipment (such as BMS) via TCP/IP and JBUS/MODBUS communication protocols.

Water leak detection sense cable FG-EC :  The FG-EC sense cable detects and pin-point locates water & base liquid leak at any point along the cable. It is designed to be connected on FG-SYS or FG-NET digital unit. The typical applications are data centers, trading floors, high value and mission critical infrastructure.

Acid leak detection sense cable FG-AC : FG-AC sense cable detects and pin-point locates acid leak at any point along the cable. It is designed to be connected on FG-SYS or FG-NET digital unit. The typical applications are laboratories, fab plants, cleanrooms, etc. in order to provide permanent protection to limit the financial consequences of an undetected acid leak. The FG-AC sense cable is made in corrosion and abrasion resistant cable that can be reused after cleaning.

Oil Sense Cable FG-OD : FG-OD is a fast response, re-usable and ATEX approved oil leak detection sense cable, it is insensitive to water, inorganic pollutants and external loads (pressure).

Accessories for water / acid leak detection systems : TTK leak detection systems offer a full range of connection accessories and kits as diversion boxes, leading cables, end terminations. These items assure a proper functioning of the systems.

Accessories for oil leak detection systems : TTK oil leak detection systems offer a full range of connection accessories and kits as diversion box, leading cables, end terminations. These items assure a proper functioning of the systems.

 

LOCATING CONTROL PANEL UNITS

LOCATING UNITS

FG-NET

 

Powerful system capacity (monitoring up to 500 sense cables on 3 independent zones) with touchscreen interface, TCP/IP and JBUS/MODBUS communication protocols. The FG-NET is suitable for water, acid and oil leak detection

LOCATING UNITS

FG-SYS

 

Monitoring up to 120 lengths of sense cables on 3 independent zones, the FG-SYS is the most widely installed panel around the world over the past decade. Suitable for both water and acid leak detection.

LOCATING UNITS

FG-ALS8

 

NEW PRODUCT: With 8 independent detection zones and up to 100 meters of sense cable per zone, the FG-ALS8 is ideal for medium and large applications where the precise water/acid leak location is required.

LOCATING UNITS

FG-ALS4

With 4 independent detection zones and up to 45 meters of sense cable per zone, the FG-ALS4 is easy to use and precise in its accuracy. Perfect for small and medium applications where water/acid leak location is required.

 

LOCATING UNITS

FG-ALS

FG-ALS is no longer available. It is replaced by FG-ALS4: 4 zones alarm and location system unit. Click here to view FG-ALS product datasheet and installation manual.

 

NON-LOCATING SOLUTION

 

Water & Acid Leak Detection Non-Locating Solution

WITH FG-A UNIT

 

This water leak or acid leak detection solution contains FG-A alarm unit, FG-ECS / FG-ECX water sense cables (or FG-ACS / FG-ACX for acid detection) and system accessories.

 

 

LEAK DETECTION ALARM UNIT FG-A + WATER SENSE CABLE FG-ECS

Leak Detection Alarm Unit FG-A: The FG-A alarm unit is a simple leak detection unit without location. It can control up to 15 meters of sense cables. Visual and audible indicators on the front panel allow easy identification of the type of fault (leak or cable break). Two zero volt contact relays provide numerous signaling and centralised monitoring options.

The FG-A alarm unit is designed to be used with TTK analog sense cables; FG-ECS, FG-ECX, FG-ACS and FG-ACX, to give immediate detection of liquid leaks (water, acid or base). Available in wall mounted and rack mounted version.

Water sense cable FG-ECX: The FG-ECX sense cable can be connected to two of TTK’s alarm units only: Locating Alarm Unit FG-ALS4 and Alarm Unit FG-A. It detects and locates leaks to the nearest meter when connected to the locating units. The Sense Cable FG-ECX is available in standard, pre-finished lengths of 3, 7 or 15 meters complete with connectors.

Water sense cable FG-ECS : The FG-ECS sense cable has a spliced junction with a length of 3.5 meters of jumper cable and an end termination. It detects the presence of water and base liquids at any point along its length. The FG-ECS sense cable is designed to be connected to analog alarms (FG-ALS4 & FG-A) or digital units (FG-NET & FG-SYS, via diversion box FG-DTCS). It detects and locates the leak when connected with locating units

NON-LOCATING UNIT

FG-A

• Simple Detection without Location

• Three LED Indicators

• Two Output Relays

The FG-A alarm unit is a simple water leak detection, acid leak detection and base leak detection unit without location. It can control up to 15 meters of sense cables. Visual and audible indicators on the front panel allow easy identification of the type of fault (leak or cable break). Two zero volt contact relays provide numerous signaling and centralised monitoring options.

The FG-A alarm unit is designed to be used with TTK analog sense cables; FG-ECS, FG-ECX, FG-ACS and FG-ACX, to give immediate detection of liquid leaks (water leak, acid leak or base leak). Available in wall mounted and rack mounted version.

 

SENSE CABLES

For Water / Acid Leak Detection & Location

WATER SENSE CABLES

 

 

 

WATER SENSE CABLES

FG-EC

 

The FG-EC digital and addressable sense cable (with microprocessor and a high visibility LED embedded) detects and pin-points the location of water and base liquids leaks at any point along its length. The FG-EC is insensitive to dust and metal particle contaminations, and, what’s more, from 1st July 2019, all FG-EC cables are made in low smoke zero halogen (LSZH or LZ0H) materials, it emits limited smoke and no halogen when exposed to high sources of heat.

 

WATER SENSE CABLES

FG-ECS

 

The FG-ECS works in two ways: When connected to the locating unit it detects and pin-points the position of the leak ~or~ when connected to the non-locating unit it detects the leak without pin-point mapping. To one end is 3.5 meters of TTK BUS 8723 jumper cable, whilst to the other there is an end termination enabling quick connection. From 1st July 2019, all FG-ECS cables are made in low smoke zero halogen (LSZH or LZ0H) materials, it emits limited smoke and no halogen when exposed to high sources of heat.

 

WATER SENSE CABLES

FG-ECX

 

The FG-ECX sense cable is analogue and designed to be connected to the FG-ALS8, FG-ALS4 and FG-A units. This cable detects and pin-points the location of leaks when it is connected to the locating units; and detects leaks without specific mapping when connected to the non-locating unit. The FG-ECX sense cable is made with special Low Smoke Zero Halogen materials (LSZH or LS0H).

 

WATER SENSE CABLES

FG-ECB

 

The FG-ECB sense cable is specially designed for pipes solution. It is to be belt on the bottom of the suspended pipes. An external polyethylene based braided jacket keeps water around the cable thus assures an efficient detection. The FG-ECB sense cable is a non-absorbent design that can be reused after leaks.

WATER POINT SENSOR

WATER POINT SENSOR

FG-ECP

 

The FG-ECP point sensor is available in three models (U-shape, L-shape and customized) to suit different environments and has been developed to provide quick detection of water leaks.

ACID SENSE CABLES

ACID SENSE CABLES

FG-AC

The FG-AC cable detects and pin-points the location of acid and corrosive chemical liquid leaks at any point along its length. It is made of a corrosion and abrasion resistant material that can be reused after cleaning. Being digital and addressable (microprocessor embedded) the FG-AC cable is insensitive to dust and metal particle contaminations, and, what’s more, each cable has a high visibility LED to provide quick identification of the cable status.

ACID SENSE CABLES

FG-ACS

The FG-ACS sense cable detects and pin-points leak location when connected to the locating units, or detects without specific mapping when connected to the non-locating unit. It has a length of 3.5 meters of TTK BUS 8723 jumper cable to one end and and an end termination to the other allowing quick connection.

ACID SENSE CABLES

FG-ACX

The FG-ACX sense cable is an analogue sense cable, compatible with FG-ALS8, FG-ALS4 and FG-A units. This cable can detect and pin-point leak location when connected to the locating units, and detects leaks without precise location mapping when connected to the non-locating unit.